Back to Board Index
Back to Board Index
Forum help
| how on earth do you brake once you have landed ? | |
Danny Bennett  18th Jun 2010 19:56:00 | i have tried everything that people have said to me such as arm the speed brake to max done it --- arm the autobrake done that----arm the parking brake--- done it and i even press . whilst doing all of the others so somebody help me becausde it is really annoying and a wastwe of my time when i have done a flight landed but cant stop sounds funny but its annoying after a while so please helpp ??? :D |
Stephen Dubbie 18th Jun 2010 20:23:11 | hey,
AUTO THROTTLE OFF, THROTTLE IDLE SPEED BREAK OFF AUTOBREAK SET 2,3 OR MAX APPROACH AT 150 IN A 737 AFTER TOUCHDOWN HOLD F2 THAT SHOULD STOP IT |
Dave Wave   18th Jun 2010 20:38:01 | Use the full stop button on your keyboard should work.
If you are using a joystick then by default it's button one, however, if you are using pilot assistant then I pinch button one to use as push to talk in teamspeak. The assumption being you talk more then need to brake. You can get over this by turning off PTT in pilot assistant or remapping the buttons in pilot assitant or fsx so they use different buttons. Note Pilot assistant wil always override fsx. |
Alan Ellerby   18th Jun 2010 21:35:26 | I think I see the problem.........Lets just say 20 miles out...(747)...Decrease speed to 158...Apply speed brake = Shift/...(NOT TO MAX) - flaps to MAX = (F7)...CLICK CLICK CLICK...1...5...10...20 ETC Gear down....Reverse thrusters on landing = F1 to disengage thrust and then F2 to engage reverse thrust....Keep it pressed down!..If you jump outside you will see the engines ^open up^...F1 again to disengage engines.... = Taxi;)... |
| Alan Ellerby 18th Jun 2010 21:46:28 | I think I see the problem.........Lets just say 20 miles out...(747)...Decrease speed to 158...Apply speed brake = Shift/...(NOT TO MAX)...It engages automatically on touchdown. - flaps to MAX = (F7)...CLICK CLICK CLICK...1...5...10...20 ETC Gear down....Reverse thrusters on landing = F1 to disengage thrust and then ^F2 to engage reverse thrust^....Keep it pressed down!..If you jump outside you will see the engines ^open up^...F1 again to disengage reverse thrust.... = Engine idle = Taxi;)...
Got X52 pro system...But don't need it;) Hope this helped;) Good luck:)...AL |
James Monckton   18th Jun 2010 22:20:59 | Watch this Video from the BVA Learning center, this is the 3rd in the series, but you may want to watch all of them :)
http://www.youtube.com/watch?v=SbnQo1H_ZSg Hope this helps, James |
| Danny Bennett 3rd Aug 2010 10:31:06 | thanks got it now |
| Stephen Dubbie 4th Aug 2010 15:58:56 | great |
| Andy Halliday 4th Aug 2010 17:34:01 | Flap like mad with your arms stick your legs out and pray |
| Lance Monk 4th Aug 2010 17:34:15 | Have you tried putting the brakes on? |
| Gordon Thorpe 4th Aug 2010 20:30:27 | rememder to switch of the auto speed switch before switching of auto-pilot i forget to do that a lot |
You need to Log on to post a reply. |
Forum help